Planet NVR-3250 Instrukcja Użytkownika

User’s Manual NVR-3250 32-Channel Network Video Recorder

3. Simply pull to remove the front plate once the screws are loosened from the unit. 102. To remove the front plate, turn the tool-less screws on

5. Push the tray door back to the case to secure it. 114. Remove the HDD tray by pulling the latch.

7. Once the HDD is placed in the tray, flip it over and secure the HDD with the screws. 126. Once the tray is removed from the unit, notice there

9. Secure the tray by pushing in the latch, which locks the tray with the unit. 138. Push the tray back in to the unit and push it all th

14English2.1 Rack Mounting To install the NVR-3250 in a 19-inch standard rack, please follows the instructions described below. Step1: Place the NV

3. Connect to the NVR There are various ways you can connect to the NVR and below are the suggested methods for different network setup: The NVR is

16Please click “Next” to continue. Please click “Install” to start the installation. Once the installation is complete, please check the “Fi

Please go to Start => Programs => NVR => Search NVR to run the search tool. Then you will see the utility start search the network. T

Perform search again Access NVR’s web administration page You should be prompted for the NVR’s username and password. Enter its default u

3.2 Access NVR with its default IP address The NVR comes with a pre-configured static IP address “192.168.0.20”. However, it is only used when there

Copyright Copyright © 2012 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, st

4. Live View The 32 channel NVR comes with a 32-video split window view with one video displays on a larger window. Select a channel from the drop

21 4.1 Retrieve camera’s video stream The camera list is expanded and displayed on the Live View page. .Click “All” to display videos in the 32-

4.2 Retrieve camera’s status The camera list can show each camera’s current status. Each status is represented with different colors and their meani

Camera(s) that are currently being selected for live viewing will be listed in the PTZ drop-down menu. Simply select a camera then use the PTZ contro

Auto Pan Viewing Start by selecting a PTZ camera from the drop-down list: Use the Auto-Pan control buttons to pan right, left and stop auto pan.

4.6 Live Video Control Buttons Each live video window comes with control buttons with functions described below: Take a snapshot of a live video

Take a snapshot of a live video To take a snapshot of a live video, click the button and the snapshot of the video will be displayed in a pop up wi

The button will show in different color once the audio is turned on. Click on it again to turn off audio. You may only turn on audio once channe

4.7 Change Web UI Display Language You can change the web UI display language from the current login username link located at the upper-right hand c

5. Playback Playback is a function that allows you to play one or more videos that were previously recorded by a chosen recording method or due

CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be requir

5.1 Methods to Search Playback Videos The NVR offers three methods to quickly help users find videos that were previously recorded: Search by time

Results will then be displayed in a new dialog with a “Month/Channel” table and boxes marked in dark gray represent videos found in those dates. (* V

Search by event Start by selecting which channel(s) you would like to perform a search on. Select “Search by event” from the “Search Method” drop

Play by specific time If you know when a recording was taken place, you may choose the” Play by start time” from the “Search Method” drop-down list.

34 5.2 Export Playback Videos to AVI Files User can export the recorded playback videos stored on NVR-3250 to a local computer and save them in AVI

Hit the “Start” button to start exporting. The file will be automatically named and saved under the C:\ partition. You will be notified on

6. System Setup 6.1 System Configurations The “System Configurations” page provides users options to setup the device quickly and properly. After p

37 4. Click Apply for the settings to take effect. The recorder can detect the presence of a DHCP server upon startup. It sets itself to use static

6.1.2 DDNS Server DNS, which stands for “Dynamic DNS”, is a method, protocol, or network service that provides the capability for a networked devi

1. In order to properly configure the DDNS service function, please register a free DDNS domain name and account from DynDNS first. Go to http://dyn.

Table of Contents 1. PRODUCT DESCRIPTION...

4. Once you get to the next page, fill in the necessary fields as illustrated above 5. Go back to the NVR’s DDNS service configuration page unde

6.1.3 Time and Date Set the time and date by selecting the time zone according to your location. It is imperative that you set the recorder’s ti

6.1.4 User Account The recorder can be accessed by multiple users simultaneously. You can add, remove, and edit users by using options provided in t

6.1.5 Group Privilege Group Privilege is where you can create multiple customized access policies for situations if you need the recorder to be

To create a group, select a group from the “Group” drop-down. Menu You can change the group name by clicking the “Change Group Name” button. A text

This page will list the Internal disks (or RAID volumes), and the E-SATA disk only. The HDD will be formatted in EXT3 file system. The USB HDDs w

46 2. Please wait for a few moments while the NVR is creating the RAID volume. 3. You will be prompted once the action is completed successfully.

5. Go back to the "Hard Disk List" page and the RAID volume should be in the list. Click "Format" to bring the RAID volume onli

48 Once a RAID volume is created, the “Delete RAID" option should be presented in the “Disk Action” drop-down menu. (Regardless the RAID vol

6.2 Channel Configurations 6.2.1 Add a Camera The NVR provides two options for adding a new camera. Users have the option to let the recorder autom

1. Product Description The PLANET NVR-3250 is the rack-mount NVR, which optimizes your space utilization by controlling your systems in just 1U space

50

4. It is corresponding information should be displayed in the “Camera Information” section. Enter its username and password and select the channel ID

Enter manually Once the camera's settings are polled and displayed, you can also enable "continuous" recording and ad

For single stream camera, only the recording fps can be adjusted. Simply follow the instruction described above but instead of using the “Search

6.2.2 OSD Settings The OSD (On Screen Display) allows users to add informational text message and embed it onto the ideo. By default, this function

6.2.3 PTZ Preset Settings The recorder supports PTZ cameras and can set multiple preset points or retrieve and manage preset points that are set in

56 6.2.4 PTZ Preset Sequence Once you have multiple preset points defined for a camera, it is convenient for monitoring to set up the sequencing vi

6.2.5 E-Map Setting 6.2.5.1 Local Map Setting Local Map Setting is a function that alerts users whenever there is an event triggered (e.g. motion d

58Then click and drag the camera icon to move the camera to define its location. Access the E-Map Monitor page from the upper-right hand corner m

6.2.5.2 Google Map Setting The Google Map monitor is a similar function to the aforementioned E-Map monitor. It is useful if you are managing multip

 Multiple languages support  Supports mobile phone remote view with Android, WinMo, Symbian S60, iPhone, Blackberry 4.6  Manage up to 32 NVRs (

60cation: n to s active Internet connection and can not be used in conjunction with the can click anywhere on the map and hold down the mouse left

6.3 Event Configurations The “Event Configurations” section allows users to define conditions that constitute an event, its corresponding trigger ac

1. For cameras that come with physical digital input ports, their ports will be listed in the far left drop-down menu. 2. Pick the desired channel

To add an FTP server, 1. Start by giving a name to the server that you are adding to the recorder. 2. Enter the hostname or the IP address of the F

If you wish to edit/remove/enable/disable an FTP server, click to highlight one from the profile list and choose the corresponding action button.

.Where the warnings will be sent to and how they will be sent. Select Channels to Enable Event Trigger and which type of event should be triggered.

66 * Event trigger may not work for cameras that are placed outside of your local network or on the Internet until the UPnP Port Forwarding” is enab

6.4 Recording Configurations The “recording configurations” gives users the overall control of how and when a recording is performed and the quality

68 Users can also set to keep a previous number of days of recording data by enabling the option below. This is quite often used in application suc

6.4.2 Schedule Recording Here you can define the time range of the schedule recording for all channels. To configure a schedule recording: 1. Us

1.4 Specification Product NVR-3250 Video/ Audio Video Input 32 channels IP cameras Video output VGA local display, web interface Resolution 5M

6.5 System Options System Options gives users a glance of the overall system status and allows users to perform maintenance tasks such as upgradi

6.5.3 Maintenance “Maintenance” provides functions for users to: • Reboot the NVR when necessary • Reboot cameras directly from the NVR • Perform

72The firmware can be upgraded through web UI or USB. Before upgrading firmware, please backup configuration in advance.

** the firmware file comes with a “.tar.gz” file extension, please use the file as is, DO NOT unzip it. It’s normal that you may only see “.tar” as

The process should be displayed and you should be prompted back to the “Maintenance” page after it is complete. 6.5.4 Disk Status “Disk Status” giv

Button Power, Reset LED Display 1 x Power 1 x System 1 x Event Power 100~240V AC, 0.7A / Max. 50/60Hz Operating Temperature 0~40 Degree C Dimension

Connector Description VGA VGA output Ethernet 10/100/1000 Mbps network. USB Connect your USB flash disk for firmware upgrade and backup. E-SATA Ext