Planet CS-2001 Instrukcja Użytkownika Strona 96

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 848
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 95
85
3.1.1 Modifying the LAN Interface (NAT / Routing)
Prerequisite Setup (Note: IP addresses used as examples only)
Port1 is configured as LAN1 by default. (IP address: 192.168.1.1, NAT/ Routing)
Step 1. Go to Network > Interface and then set as below:Figure 3-1
Click Port1’s Modify button.
Select LAN for Interface Type.
Select NAT Routing for Connection Type.
Enter the IPv4 Address and Netmask.
Tick Ping, HTTP and HTTPS.
Click OK.
Figure 3-1 Modifying the LAN Interface
Note
1. The LAN subnet is configured as 192.168.1.x/24 by default. After modifying the LAN subnet,
LAN PCs’ subnet must be modified as well for the LAN users to access the Web UI.
Przeglądanie stron 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 847 848

Komentarze do niniejszej Instrukcji

Brak uwag